MPLS - VPLS Support on 6509 V E

[prasad.gsmc]

Hi,

We would need to configure VPLS on 6509 V E platform with 12.2.33 sxi4 IOS and with 6724 SFP line cards. MY backbone is mpls ready. Can I configure VPLS on this platform ?

My requirement is point to Multipoint (a broadcast from hub location ) layer to traffic exchange... if not VPLS what is the other possibility by making using of underlying MPLS network ?

with regards

Prasad.K

[Giuseppe Larosa · Accepted solution]

Hello Prasad,

without one the following linecards:

ES-20, ES-40

SIP 400 or SIP 600

I'm afraid VPLS is not supported

see

http://www.cisco.com/en/US/products/hw/routers/ps368/module_installation_and_configuration_guides_chapter09186a0080440138.html#wp1270439

table 4-9

and

http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-49152.html

Hope to help

Giuseppe

[prasad.gsmc]

thanks and your comment