ā02-11-2011 05:30 AM - edited ā03-04-2019 11:23 AM
Friends,
I have situation where customer is having 2 Hub locations and 8 spoke location for their domestic MPLS VPN
2 Hub locations are exit point for international traffic too.
they want international traffic from some of the spoke location to exit from HUB1 while rest of them should use from Hub 2.
have attached diagram for visual understanding of this scenario.
Please revert with your ideas
thanks
V
ā02-11-2011 06:29 AM
Question: does all of the addressing reside in the same space, ie 10.100.0.0?
ā02-11-2011 10:26 AM
If you use MBGP and vpnv4 routing table you could use BGP local preference to steer some spokes to a specific hub.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c95bb.shtml#localpref
This could apply if you run those protocols.
ā02-11-2011 05:54 PM
internation location hav different private address while domestci networks are of same address space
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide