multi link switching

[PRAVEEN KUMAR GVK]

hi

for dual line i had confiured ipsla echo and it working fine but now my costumer want for 6 links (each flour).

can any one help to configure the r1 and r2 for bellow attached Connectivity.

thankq.

[daniel.dib]

Was there supposed to be a topology attached here?

You are using IP SLA for failover? And you want to use that over 6 links? You could put several SLAs and floating static routes but it's the wrong solution for the kind of design I think you are after.

Daniel Dib
CCIE #37149

[PRAVEEN KUMAR GVK]

hi daniel

Thans for your reply.

Yes i am using for failover. For dual link ipsla echo works fine.

This was a pre-sale demo to my costumer.

The topology was not desgined yet. Both routers are 2811(cme router with 12.4t ios). Switches are unmanageble.

Requirement:

1.the connectivity should be on if any one link is live (failover).

2.each link was defined by priority basics.

can you please suggest which configuration is suitale for this.

[Johannes Kingma]

Yes I agree that was very helpfull!

[daniel.dib]

What kind of circuits is it? Can you run dynamic routing? Using a static solution like IP SLA isn't really scalable for that many links.

Daniel Dib
CCIE #37149

[PRAVEEN KUMAR GVK]

hi daniel

it is simple ethernet connectivity. topology is star.

they just need a demo. so please suggest which is suitable for this.

ipsla is not mandatory. the only thing is pc's should contact server with any one or more healthy link(failover).

thankq.