Dears,
I would like to know If VPLS multihoming redundancy feature is avilable at Cisco or not ?
I have a CE connected to two different PEs for redundancy. PEs are configured in a VPLS mode. At steady state only primary PE should carry traffic ... xSTP should not be configured due to its slow convergence compared with VPLS
This feature "VPLS Multihoming with BGP Signaling" is availabe at Juniper and I want to implement at Cisco http://www.netscreen.at/techpubs/en_US/junos10.4/topics/task/configuration/vpls-multihoming-bgp-signaling-solutions.html
Appreicate your assistance
Many Thanks
Sherif Ismail
