Can anyone tell me if I want to remove a T1 controller from an ATM AIM group, can I do that without having the Telco do the same thing on their side? My guess is that they have to do it as well or it will break but I wanted confirmation from other sources.
This is on a Cisco 2851 and I want to take T1 0/2/1 out of the mix.
Thanks!
/ahuffer/
network-clock-participate wic 2
no network-clock-participate wic 3
network-clock-participate aim 0
network-clock-select 1 T1 0/2/0
network-clock-select 2 T1 0/2/1
!
!
<snip>
!
!
controller T1 0/2/0
mode atm aim 0
framing esf
linecode b8zs
!
controller T1 0/2/1
mode atm aim 0
framing esf
linecode b8zs
!
!
<snip>
!
!
vc-class atm P3392-S3392-M1-mux-class
vbr-nrt 3072 3072
oam-pvc manage
oam retry 3 10 1
encapsulation aal5mux ip
!
!
<snip>
!
!
interface ATM0/IMA0
mtu 1500
no ip address
no ip redirects
no ip proxy-arp
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
!
interface ATM0/IMA0.1 point-to-point
ip address *.*.*.* 255.255.255.252
pvc bjre513-1 0/71
class-vc P3392-S3392-M1-mux-class
!
