04-12-2016 11:57 AM - edited 03-05-2019 03:47 AM
I am in the process of setup of a sample lab at my home.
I have my main ISP coming into my personal Linksys Wireless Router. This is being used until I have a stable environment. My family might kill me if they have no internet.
Network Topology
I have multi VLANS working with DHCP on a stick setup on the router. I'm guessing I have a NAT issue because everything works but the internet. Any advice would be awesome.
Solved! Go to Solution.
04-13-2016 02:23 AM
Hi,
I guess you should put
ip nat inside
under each of your FastEthernet0/1.x subinterfaces instead of under the main FastEthernet0/1?
Plus I suppose you will assign some ports to all VLANs (not only VLAN1 and 10) on your switch?
BR,
Milan
04-12-2016 11:17 PM
Can you share full network diagram with port numbers?
04-13-2016 02:23 AM
Hi,
I guess you should put
ip nat inside
under each of your FastEthernet0/1.x subinterfaces instead of under the main FastEthernet0/1?
Plus I suppose you will assign some ports to all VLANs (not only VLAN1 and 10) on your switch?
BR,
Milan
04-13-2016 07:21 AM
Thank you much Milan. That was the issue. And yes I will be assigning the ports to different VLANS today. This was just a trial to get it working :)
Thanks
Stephen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide