I have read multiple documents on Nat-ting but still not able to resolve this.. any help is appreciated.
1. the LAN network (multiple subnets) needs to access server 1(outside) - NAT translation works fine no issues
2. a subnet from the LAN e.g SUB-TEST currently acceses server1 but I need to change it to access TESTserver 2 (outside) instead (temporarily)
I dont want to change the original setup .
I am trying to implement NAT on the local router such that
- any traffic from SUB-TEST that enters the inside interface and is going to Server1 then change the destination and NAT it to TESTServer 2
- all other LAN traffic is allowed to go to server 1.
hope this makes sense.
i am using a 1941 router for this
cheers,
RP.