ospf over frame-relay and bgp

[Kishor2125]

I have a problem in ospf over  Frame-relay.  initially my network was working fine then

i lost all the routes in R1, It will not learn routes from ospf or bgp over F-r nor it is advertising the routes to the network

I have the complete detail config, sh and verifying info in a text file attached.

plse help

Thanks

Kishor Garewal

[cadet alain]

Hi,

For the OSPF in R1-R3-R4, on R1 you didn't set the ospf network type to point-to-multipoint so it defaults to NBMA but on R3 and R4 you did.

change the ospf network type on R1 and it should solve th OSPF problem.

For BGP I must still look at your config a little bit more.

Regards.

Alain.

[Kishor2125]

Hi Cadetalain,

Thx for the help, u r right. it worked and surprisingly it also worked for the

bgp.

i do not see the connection. thanks again

Kishor

[cadet alain]

Hi,

i do not see the connection. thanks again

As in your zip file you didn't do any BGP related show commands, It's a little hard for me to see the connection as I've not really looked at the config

thoroughly.

But I'm happy it solved all your problems.

Regards.

Alain.

[Kishor2125]

Hi,

it was very basic fundamentals. iBGBP rides over IGP and thus first i had

fr-relay for conectivity, then ospf n then BGP if my ospf fails thus bgp is

effected.  When i fixed the ospf, BGP was back on.

thx for u help again.

Kishor Garewal