Packet tracer beginner - I cannot get my laptops connected to the wireless access points

[waiyinchan91198630]

Hi all, I am experiencing difficulties in my lab exercise.

The question is:

1. Implement the provided IP design on the devices in the topology.

Device	Address	Subnet	Default Gateway
Laptop 0	192.168.1.1	255.255.255.0	192.168.1.2
Laptop 1	192.168.2.2	255.255.255.0	192.168.2.1
WAP 0	SSID Me
WAP 1	SSID You
Router F0/0	192.168.1.2	255.255.255.0
Router F0/1	192.168.2.1	255.255.255.0

and I have got this: 

I have set up the laptops with the WPC300N, but I still cannot make the wireless network running. 
Please kindly help. 

[Georg Pauwen]

Hello,

post the zipped Packet Tracer project (.pkt) file here...

[waiyinchan91198630]

Please see the packet tracer file attached.

Much appreciated for your help.

[Georg Pauwen]

Hello,

the only way I get this to work is by adding a third interface to the router...

Attached the working file...

[waiyinchan91198630]

Thank you for showing me the topology template.
I tried to set the configurations as yours for all the devices, somehow the wireless network still not showing up at my end. T_T 

[Georg Pauwen]

Hello,

in the Wirless0 tab of the laptops, you need to set the SSID to match you access points. Check the file I sent for the settings...

[mikesiqueira]

It was exactly my solution! Thanks!