06-06-2012 10:47 AM - edited 03-04-2019 04:35 PM
Hi All ,
We are planning to configure the ipv6 PBR on our 7606 routers. We have configured the route-maps successfully .
but when we tried to apply those on interfaces we are facing an problem .
when we trying to give command # ipv6 policy route-map <route map name> . we are unable to find policy command option in the command list.
IOS Version : c7600rsp72043-advipservicesk9-mz.122-33.SRE3.bin .
can any one pls let me know whether above command is supported or not. attaching the logs
Any quick support is helpful.
Regards,
Siddharam
Solved! Go to Solution.
06-07-2012 10:33 AM
Siddharam-
As far as I can tell, you need to upgrade to a v15 IOS to use IPv6 PBR. I don't see it mentioned in the 12.2.33 guide but it is in the v15 guide:
http://www.cisco.com/en/US/docs/routers/7600/ios/15S/configuration/guide/IPv6_PBR.html#wp1064845
HTH,
Paul
I just confirmed in the release notes that you need v15 for this.
06-07-2012 10:33 AM
Siddharam-
As far as I can tell, you need to upgrade to a v15 IOS to use IPv6 PBR. I don't see it mentioned in the 12.2.33 guide but it is in the v15 guide:
http://www.cisco.com/en/US/docs/routers/7600/ios/15S/configuration/guide/IPv6_PBR.html#wp1064845
HTH,
Paul
I just confirmed in the release notes that you need v15 for this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide