cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
291
Views
0
Helpful
1
Replies
nojpt
Beginner

Performance Routing

Hi,

I am testing oer/pfr with two border routers (MC/BR and BR). I wanted to monitor specific prefixes (routers at the remote sites), thus i wanted to define monitored prefixes manually (learn function disabled). I have cnofigured the following to the MC, but i am not sure if this prefixes were added to the MTC list. When i do 'show oer master' it says 0 monitored prefixes.

How do i verify that the prexies are indeed being monitored? Or maybe i am doing all this in a wrong way.

Appreciated any help.

Thanks.

====================

! MC Router

!

ip prefix-list PREFIXES seq 10 permit 5.5.5.1/32

ip prefix-list PREFIXES seq 20 permit 6.6.6.1/32

!

oer-map MONITORED_PREFIX 10

match ip address prefix-list PREFIXES

!

1 REPLY 1
Steve Lyons
Beginner

Hi,

You would issue the commands show oer master traffic-class and show oer master policy.

Best Regards,

Steve Lyons - Cisco