About nojpt

nojpt · 03-26-2009

Hi guys,Need to do this without rebooting the device. How do i do this?Thanks.

nojpt · 03-20-2009

Hi,I am testing oer/pfr with two border routers (MC/BR and BR). I wanted to monitor specific prefixes (routers at the remote sites), thus i wanted to define monitored prefixes manually (learn function disabled). I have cnofigured the following to t...

nojpt · 03-19-2009

Hi,Can somebody help me out please?? I am having a routing loop to this route 222.128.192.0/18.I have 2 eBGP routers multihomed to two isps. 1 isp connection to each router. when i do a show ip route to one of the router, it has a route the this n...

nojpt · 08-17-2008

Hi,Sorry if this seemed like a newbie question...Is it normal for my standby router to have a bigger outgoing traffic than my active router on a HSRP group?

nojpt · 05-20-2008

I don't know if this is possible, would appreciate any insight.I have a host on my perimeter interface (DMZ) Natted to outside with a public IP address. I want to access this host on the DMZ using its Natted public IP address (on the outside interfa...

nojpt · 03-22-2009

Hi Mohamed,I have no filters on these routers except in the advertisement where i filter to announce only my own AS.!ip as-path access-list 4 permit ^$!route-map out permit 10 match as-path 4!I did the clear ip route for the prefix 222.128.192.0/18 l...

nojpt · 03-22-2009

Hi Giuseppe,Both routers are 7206VXRs and using 12.3(14)T5 IOS.I realize too that R1 is the problem. I have no idea where it gets the entry on its cef table. I may have to clear its fib but i am looking for ways to delete the enry for 222.128.192.0...

nojpt · 03-22-2009

Hi Victor,Thanks for the reply.61.28.163.41 is my R1 eBGP neighor and is a point-to-point connection. The 10.222.222.2 is my R1 iBGP neighbor in multihop condition.The funny thing is, my other router R2 (the iBGP neighbor of R1) has R1 as next hop f...

nojpt · 03-22-2009

Hi Giuseppe,Thanks for your response. Really appreciate it. Provided below are stuff you asked:These two routers are 7206 VXRs. BGP prefixes on both routers are R1=286834 and R2=266323. I have no filters on BGP except advertised filter announcing ...

nojpt · 08-17-2008

Thank Rick.

Member Since	‎01-09-2003 04:37 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	95

User Statistics

User Activity

How to Clear CEF Table at 7206VXR

Performance Routing

Routing Loop

HSRP Question

Accessing Perimiter NAT IP from Inside host

Re: Routing Loop

Re: Routing Loop

Re: Routing Loop

Re: Routing Loop

Re: HSRP Question