Ping between 2 SSID

[Ed Lo]

Hi,

I have 2 SSID on a router and would like them to ping to each other. So I would like to be able to have 2 devices connected one on each SSID and ping to them. How would I do this?

thank you

[Julio E. Moisa]

Hi

Is this Access Point connected to a switch multilayer? I have made it but you need to enable the communication between these 2 networks. The SSID will be associated to different VLANs so you need to enable ip routing on the switch.  A router will enable the communication between them automatically. I have made it with Aironet series. 

Please check these links:

https://supportforums.cisco.com/document/55561/multiple-ssid-multiple-vlans-configuration-example-cisco-aironet-aps

https://supportforums.cisco.com/video/11929126/multiple-ssid-multiple-vlans-configuration-example-cisco-aironet-aps

Hope it is useful

:-)

[Ed Lo]

I used that guide to set them up. I was more looking for the commands I would use to ping from a laptop on one SSID to another device connected to the other SSID. My set up is just a 1941w router broadcasting the 2 SSID.

[Julio E. Moisa]

Hi,

What are you meaning with: I was more looking for the commands I would use to ping from a laptop on one SSID to another device connected to the other SSID

You could use.

From command prompt (Windows OS)

ping x.x.x.x <-- remote IP adddress. 

But not sure if you are looking for that. 

[Ed Lo]

Yes things like that. I was looking up how to do it and I started to confuse myself. If it clears it up more I was looking for how I would ping from one device to another on a separate network.

[Julio E. Moisa]

Hi Ed,

Thank you for the explanation, below you will find a couple of links they could be useful for window OS:

http://www.serverintellect.com/support/windowsserver/infinite-ping/

https://www.lifewire.com/ping-command-2618099