11-27-2016 11:39 PM - edited 03-05-2019 07:34 AM
Dear All,
We are using ws-2960xr-24ps-i switch in our network.All poe port was working properly till last week.But from last week ,2 poe port is not working properly with poe functionality.when i attach laptop in switch port,same come UP,but when I attach CCTV camera in above port same goes down.
same CCTV camera working properly on other port on same switch.we have attached only 4 CCTV camera on switch.
I have done below action :
1. shut and no shut (same result not comes UP)
2. sh power inline (every things seems OK)
Please any one help for above problem.
11-28-2016 12:21 AM
Post the complete output to the command "sh interface status err".
11-28-2016 12:28 AM
Hello,
try and configure the ports where the CCTV devices are connected to for high priority:
2960(config-if)# power inline static max max-wattage
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide