Hello Guys,
I have configured my two vdsl link with ppp multilink but i am not getting the desired bandwidth. Here is my configuration is this okay or i need something more in the configuration. My router is 2921 what is the maximum WAN throughput of 2921?
!
controller VDSL 0/0/0
!
controller VDSL 0/1/0
!
!
interface Multilink1
no ip address
ip virtual-reassembly in
ip virtual-reassembly out
ppp multilink
ppp multilink links maximum 4
ppp multilink group 1
ppp multilink fragment disable
ppp multilink mrru local 1492
ppp multilink mrru remote 1492
waas enable
!
interface Ethernet0/0/0
no ip address
!
interface Ethernet0/0/0.10
encapsulation dot1Q 10
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface Ethernet0/1/0
no ip address
!
interface Ethernet0/1/0.10
encapsulation dot1Q 10
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface Virtual-Template1
no ip address
!
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username ******** password 0 ********
ppp multilink
ppp timeout idle 2
ppp timeout multilink link remove 2
!
interface Dialer1
description line
mtu 1492
no ip address
!
ip route 0.0.0.0 0.0.0.0 Dialer0
!
