04-08-2011 12:16 AM - edited 03-04-2019 12:01 PM
Hi
I have a problem with my Cisco 887V VDSL-router. The router gets a ip-address with dhcp from my provider. That works fine. I also can ping from the router:
routerVdslTestNew#ping google.ch source vlan 1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 74.125.79.99, timeout is 2 seconds:
Packet sent with a source address of 10.10.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/52 ms
My problem: If I want to ping google from a computer in the VLAN1 the ping doesn't work.
C:\Users\XXXXXX>ping 74.125.79.99
Ping wird ausgeführt für 74.125.79.99 mit 32 Bytes Daten:
Timeout.
Solved! Go to Solution.
04-08-2011 01:09 AM
Hi,
In config mode reenable ip routing with the ip routing command.
Regards.
Alain.
04-08-2011 12:28 AM
can you post "sh ip int brie" and "sh ip nat trans" outputs.
04-08-2011 01:09 AM
Hi,
In config mode reenable ip routing with the ip routing command.
Regards.
Alain.
04-08-2011 04:33 AM
Thank you! That was it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide