Problem with VWIC

lebaphuong · ‎05-18-2006

I have VWIC 2MFT-G703. When I switch power on (router 3660), all AL LED turn yellow. Is this card all right?. What I have to do?

spremkumar · ‎05-18-2006

Hi

Have you tried reinstalling the same in another available slot ?

Also are you seeing any error logs there in the console ? can you post the output of sho version taken out from the router ?

regds

lebaphuong · ‎05-18-2006

Hi

I tried reinstalling in another slot and result is the same (all AL LEDs are amber)

I don't see any error logs in the console

Here is Version taken from the router

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3660-JS-M), Version 12.1(5)YB2, EARLY DEPLOYMENT RELEAS

E SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Compiled Wed 21-Mar-01 03:44 by ealyon

Image text-base: 0x60008960, data-base: 0x61680000

ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

ROM: 3600 Software (C3660-JS-M), Version 12.1(5)YB2, EARLY DEPLOYMENT RELEASE SO

FTWARE (fc1)

VTI-HCM-SPT uptime is 13 minutes

System returned to ROM by power-on

System image file is "flash:c3660-js-mz_121-5_YB2.bin"

cisco c3660 (R527x) processor (revision C0) with 56320K/9216K bytes of memory.

Processor board ID JAB053580MB

R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

TN3270 Emulation software.

Primary Rate ISDN software, Version 1.1.

3660 Chassis type: ENTERPRISE

4 FastEthernet/IEEE 802.3 interface(s)

4 Channelized E1/PRI port(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Best Regards

Phuong