Hi we using HFQ to shape and queue the traffic outgoing on our Ethernet WAN Interfaces
shape average 9700000 97000 0
encapsulation dot1Q 1022
ip address x.x.x.x 255.255.255.252
ip flow ingress
ip pim sparse-mode
ip tcp adjust-mss 1320
ip ospf authentication message-digest
ip ospf message-digest-key 10 md5 <removed>
ip ospf network point-to-point
bfd interval 200 min_rx 200 multiplier 3
crypto map MAP-GETVPN-SECURE-WAN
service-policy output xQOS-SHAPED-10000-QUEUE-POLICY
Now we had a discussion, if the Shaper is counting the whole Packet for the calculation including the MAC-Header or just the IP-Packet.
We made Tests filling the Line up with 64-Byte Packets, and in this case its important to know how the shaper counts it (whole packet 64Byte, IP-Packet 50Byte) because our ISP is using an Policer which is definitifely counting the whole Packet.
Does anybody know how it works really on an IOS-Box running 15.0(1)M4