Quick Route Map Question

[lamav]

How come my static route is getting redistributed properly, yet the route map and access-list dont show any hits?

switch2#sh run | be router eigrp

router eigrp 10

redistribute static route-map STATIC

network 1.1.1.1 0.0.0.0

!

switch2#sh route-map

route-map STATIC, permit, sequence 10

Match clauses:

ip address (access-lists): 10

Set clauses:

metric 10000 1 255 1 1500

Policy routing matches: 0 packets, 0 bytes

switch2#

switch2#

switch2#

switch2#sh access-lists 10

Standard IP access list 10

10 permit 100.100.100.100

switch2#

Thanks

[John Blakley]

Victor,

I set a couple of routers up exactly like you have yours, and I see hits on the acl but not on the route map. Could it be inherent to the switch or IOS?

HTH,

John

[lamav]

I dont know..I bet if I searched the Internet high and low, I would find the answer....just dont have the patience for it now...