07-09-2011 02:07 AM - edited 03-04-2019 12:55 PM
Dear,
I have designed and implemented my organisation with fully redundant/load sharing setup via BGP, but facing small issue like looping and my other remote site which are on same (MPLS cloud) BGP-AS are sending the traffic to only new Backup router which causing off-line to my remote sites.
diagram is attached for your understanding.
I believe expertise guideline and your valuable feedback will correct me to drive properly.
Regards,
Jaleel Ahmed.
07-09-2011 05:25 AM
Hi
Consider adding null routes to major subnet to avoid loops
Sent from Cisco Technical Support iPhone App
07-09-2011 05:37 AM
Can you please provide some more details with routing configuration of both of the routers
For example are using the link with 4 m as back only for inbound traffic from remote sites
Are using as path prepending to achieve this !
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide