hello All,
I have created lab and was doing preparation of BGP lab. Lab Scenario is attached herewith.
I just do the simple configuration of BGP, for three router's i used iBGP and other router's are connected via eBGP.
I checked and found that every prfixes are advertised in every AS but when i was doing the ping, then prefixes are not reachable.
Only from iBGP to eBGP, advertised prefixes were reachable.
eg: AS1 prefixes are updated in AS2>AS3>AS4>AS5 AND vice-versa.
When i do the sh ip route to any prefixes, then it display, no subnet in Route table. When i do sh ip bgp, i must see that prefixes are advertised in BGP.
Please correct me for the same. My question is that Do i need to do routing for other AS to update Prefixes in router's rout table.
