Dear All,
I have a technical question relating to the possibility of the configuration of the Cisco Channelized STM-1/OC-3 card as normal SDH Mux/Demux.
-Is it possible to configure first 30 e1 from the same stm-1 port to one remote equipment and second 30 e1 from the same stm-1 port to other remote cisco equipment containing the same type of stm-1 card using PWE (pseudo wire emulation)? What is the ITU/IEEE standard for this method called? Please refer the attachment screenshot and if possible please provide the solution with required cards/configuration.
-What is the different between channelized and unchannelized STM-1/E1?
- Is STM-1 card is compatilible with router or switch?
Thank you
Best Regards,
Ashish
-
