Router & E1 module requirement

[MAKhan]

Hi,

I need your help to inform me what exactly do i need to order to hook 8 sites to head office:

HO site order:

1- Cisco ISR44331/K9 router (3GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base)

2- Cisco NIM-8CE1T1-PRI (8 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module)

Remote site order:

1- Cisco ISR4321/K9 router (2-Port Gigabit ISR Router)

2- Cisco NIM-2CE1T1-PRI (2 port Multi-flex Trunk Voice/Channelized Data T1/E1)

do i need any other module PVDM4-32 or IOS software to install & configure the above NIM-2 or NIM-8 module in the above routers?

any other issues with above router modules?

your early help would be highly appreciated.

best regards

Khan

[Giuseppe Larosa]

Hello MAKhan,

if the E1 will be used for voice applications you will need a uck9 license

see the following thread that explains all the configuration steps and how to check the required licenses

https://community.cisco.com/t5/collaboration-voice-and-video/basic-isdn-pri-e1-configuration/ta-p/3149294

Hope to help

Giuseppe