cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
299
Views
0
Helpful
1
Replies

Router archive log commands

azoubakis
Level 1
Level 1

Does anyone know what the following means that shows vty0 as a user ?
While further down in the last commands the user that exists in cpe is normally shown.

Basically I'm looking to find out who threw the commands with vty0@vty0

358     1           vty0@vty0     |line con 0

  359     1           vty0@vty0     |exec-timeout 15 0

  360     1           vty0@vty0     |logging synchronous

  361     1           vty0@vty0     |transport input none

  362     1           vty0@vty0     |transport output none

  363     1           vty0@vty0     |stopbits 1

  364     1           vty0@vty0     |line vty 0 4

  365     1           vty0@vty0     |access-class 10 in

  366     1           vty0@vty0     |exec-timeout 15 0

  367     1           vty0@vty0     |privilege level 15

  368     1           vty0@vty0     |session-limit 3

  369     1           vty0@vty0     |logging synchronous

  370     1           vty0@vty0     |no vacant-message

  371     1           vty0@vty0     |transport input all

  372     1           vty0@vty0     |transport output none

  373     1           vty0@vty0     |ntp logging

  374     1           vty0@vty0     |ntp source GigabitEthernet0/0/0

  375     1           vty0@vty0     |ntp access-group peer 99

  376     1           vty0@vty0     |ntp server XXXXXXX prefer

  377     1           vty0@vty0     |ntp server XXXXX prefer

  378     1           vty0@vty0     |ntp server XXXXXX

  379     0       Alex@vty0     |no ip ssh maxstartups 5

  380     0       Alex@vty0     |no ip ssh rsa keypair-name

  381     0       Alex@vty0     |crypto key generate rsa modulus 2048

  382     0       Alex@vty0     |ip access-list extended 110

  383     0       Alex@vty0     | no deny ip host 0.0.0.0 any

  384     0       Alex@vty0     | 55 deny udp any any eq domain

  385     0       Alex@vty0     | 60 deny tcp any any eq domain

  386     0       Alex@vty0     | 65 deny ip host 0.0.0.0 any

  387     0       Alex@vty0     |line vty 0 4

  388     0       Alex@vty0     | transport input ssh

1 Reply 1

Solidshadow
Level 1
Level 1

I've have recently spotted this on an ios switch. With backup comparison, we were able to spot that the ace order in an acl was changed to permit ip any any. I'm also looking for more info on this.

Review Cisco Networking for a $25 gift card