Router

[ThulaniGoba7610]

Hi everyone, 

I quickly wanted to find out if it would be possible to buy an ISR4431/K9 and later install a PVDM4 on the Subs slot on the PRI Card? If you could please assist. 

Thank you 

[Giuseppe Larosa]

Hello,

here is the procedure to follow to install a PVDM4 in an ISR4431 from Hardware installaiton guide for ISR 4000

https://www.cisco.com/c/en/us/td/docs/routers/access/4400/hardware/installation/guide4400-4300/C4400_isr/FRUs_Modules.html#48696

Warning: you may need appropriate license/feature set  to be able to use the module.

see the voice datasheet

https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet_c78-728308.html

Hope to help

Giuseppe

[marce1000]

 Ref : https://www.cisco.com/c/en/us/td/docs/routers/access/4400/hardware/installation/guide4400-4300/C4400_isr/FRUs_Modules.html#81118

                  I would then presume this would work.

 M.