ā12-16-2015 01:09 PM - edited ā03-05-2019 02:57 AM
Hi all
I am looking for the best approach to achieve 3 points on the network.
I have 2 Sites, A and B only one subnet on each site vlan 1 on each site, both sites have 1 MPLS connection to the rest of the network, since this 2 sites are really close to each other, I have a pair of antennas bridging the two sites, for now this antennas do not pass traffic yet.
What I want to be able to do with the bridge of the antennas is
1.- pass traffic between this two sites without using the MPLS
2.- make Site A subnet available on Site B on a different vlan for Disaster Recovery purposes and vices versa
3.- If the MPLS on one of the sites fails to be able to route traffic to the MPLS of the other site.
I have been trying to get this 3 points to work on one configuration but not able to achieved it.
Who can help me with a guide for this ?
Regards
ā12-16-2015 01:19 PM
What is the budget?
What is the WAN bandwidth now and what will be the WAN bandwidth in 3 years?
ā12-16-2015 01:28 PM
Hi Leo
There is no budget for this, we already have the MPLS Router and AP for each site installed working.
WAN bandwidth is 20 Mbps, 3 years 50 Mbps if we get a budget approved for that.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide