cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
458
Views
0
Helpful
3
Replies

Same statics routes on Cisco 891

RashhadMiah91
Level 1
Level 1

Can someone please help me? I don't seem to know why this router has two default routes in the running config. Please see below 

 

 

ro-1.gbr.amsterdam#show running-config | i ip route
ip route 0.0.0.0 0.0.0.0 192.168.1.254 254
ip route 0.0.0.0 0.0.0.0 192.168.1.254 254
ip route 10.74.254.0 255.255.255.0 10.10.10.2 name
ip route 10.74.254.77 255.255.255.255 10.10.10.2 
ip route 29.8.15.8 255.255.255.255 10.10.10.2

3 Replies 3

Hello,

 

two default routes which are exactly the same don't make any sense to be honest. Since they both have an administrative distance of 254, they might have been used as a backup for a dynamic routing protocol at some point.

 

Do you have just that one 891 router in your network ?

Hi Gerog,

 

Yep just the single 891 in the network, I have no idea why the running config is displaying the two routes. I would have assumed that the router would have overwritten the old one instead of registering both

Hello

Try deleting and re-adding - obviously if your remote admin making sure you dont permanently lose connection doing this


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: