06-20-2019 01:00 AM
i there,
For a cisco 1921, Version 15.0(1r)M16, with no config does not show my second EHWIC-4ESG:
Router#sh inventory
NAME: "CISCO1921/K9 chassis", DESCR: "CISCO1921/K9 chassis"
PID: CISCO1921/K9 , VID: V05 , SN: xxxxxxxx
NAME: "4 Port GE Non-POE EHWIC Switch on Slot 0 SubSlot 0", DESCR: "4 Port GE Non-POE EHWIC Switch"
PID: EHWIC-4ESG , VID: V01 , SN: xxxxxxx
Also my interfaces summary doesn't show the second WIC:
Router#sh ip int br
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/1 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/0 unassigned YES unset down down
GigabitEthernet0/0/1 unassigned YES unset down down
GigabitEthernet0/0/2 unassigned YES unset down down
GigabitEthernet0/0/3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
But, when I insert a different WIC, like an ASDL/POTS:
Router>sh inventory
NAME: "CISCO1921/K9 chassis", DESCR: "CISCO1921/K9 chassis"
PID: CISCO1921/K9 , VID: V05 , SN: xxxxxxxxx
NAME: "4 Port GE Non-POE EHWIC Switch on Slot 0 SubSlot 0", DESCR: "4 Port GE Non-POE EHWIC Switch"
PID: EHWIC-4ESG , VID: V01 , SN: xxxxxxxxx
NAME: "2 port SHDSL with annex A,B,F and G on Slot 0 SubSlot 1", DESCR: "2 port SHDSL with annex A,B,F and G"
PID: HWIC-2SHDSL , VID: V01 , SN: xxxxxxxx
It shows, but not in the in:
Router#sh ip int br
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/1 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/0 unassigned YES unset down down
GigabitEthernet0/0/1 unassigned YES unset down down
GigabitEthernet0/0/2 unassigned YES unset down down
GigabitEthernet0/0/3 unassigned YES unset down down
Vlan1 unassigned YES unset down down
Can anyone help me get my second EHWIC-4ESG to work? My WIC-slot clearly works and my first EHWIC-4ESG also.
But why not my second WIC?
Thanks in Advance!
Marnix
Solved! Go to Solution.
06-20-2019 01:07 AM - edited 06-20-2019 01:07 AM
06-20-2019 01:07 AM - edited 06-20-2019 01:07 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide