Setting BGP metrics for neighbors

[Steven Williams]

Is there a way to mark different networks with different metrics in the same route-map for the same neighbor?

Like if I want to mark 10.10.10.0/24 with metric of 900 but want to mark 20.20.20.0/24 with metric of 100, can I do this in the same route map?

[Steven Williams]

PAs are set for symmetric return and using ip hash. I still do not follow your comment on iBGP multi-path is not working.

[Martin L]

MED specific info is here https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
and
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13759-37.html

[Francesco Molino]

Obviously an empty statement will be needed if more prefixes have to be filtered. I just showed how you can set different attribute values within a single route-map which was the initial question, but you're right to say that if other prefixes are learned and no need to filter them in anyway, an empty route-map sequence will be needed