Show diag cmd not working in C3560 ( CE Router )

[stalin_cisco]

we are using C3560 for purpose of CE router.In the router show diag cmd not working.

Please help me for the same..

IOS version :- Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(35)SE5.

[Giuseppe Larosa · Accepted solution]

Hello Stalin,

(same post as in other thread)

be aware that C3560 is a fixed configuration device (not modular)

sh diagnostic

provides the results of system tests

show version

can provide some informations about the processor board and so on.

see command reference for your version

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_35_se/command/reference/cli2.html#wp8361286

Hope to help

Giuseppe