static command equivalent for router

[tomjoudals]

I need configure NAT for IOS router same like for PIX

PIX rule is following

static (inside,outside) 10.10.10.0 10.17.2220 netmask 255.255.55.0

so when user from outside is trying access to 10.10.10.x is NATed to inside 10.17.222.x

Thx

TJ

[network.king]

Hi

Pls go through this link .

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091cb9.shtml

Hope this helps

regards

vanesh k