STUN &QoS

[feberle]

Hi all,

I've 2 channelized E1 (256 kb/s) with the associated serial interface configuring with STUN encapsulation.

I need to configure QoS on these links.

The router has already QoS configure with CBWFQ and ACL.

But there are no IP address on serial stun interface !!

thks for ur ideas

[rais.ahmad]

All you have between the Host and this serial interface is SDLC. You can configure QoS between the interface and the other end.

This link may be helpful:

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_q_and_a_item09186a0080117084.shtml#Q6

Thanks.