We currently have the following configuration:
STB_6509#sho mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 10 WiSM WLAN Service Module WS-SVC-WISM-1-K9
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-SVC-WISM-1-K9-D
2 Centralized Forwarding Card WS-F6700-CFC
5 Policy Feature Card 3 WS-F6K-PFC3B
5 MSFC3 Daughterboard WS-SUP720
I would like to add a redundant supervisor blade to the 6509 that is in production. Can this be done plug and play and require no reload.
Are all WS-SUP720-3B the same as far as memory etc... or can I buy any used WS-SUP720-3B and it will work properly.
Thanks,
Tom