02-22-2012 03:55 AM - edited 03-04-2019 03:23 PM
Hello guys,
I have a switch WS-C3560G-48TS.
The version of IOS is:
WS-C3560G-48TS 12.2(58)SE2 C3560-IPSERVICESK9-M
The command "track number rtr" is missing. There are just three options there:
#track 10 ?
interface Select an interface to track
ip IP protocol
list Group objects in a list
Why is that so and where is rtr?
I have the same switch with the following ios version:
WS-C3560G-24TS 12.2(50)SE1 C3560-IPSERVICESK9-M
rtr is present in there.
Solved! Go to Solution.
02-22-2012 04:39 AM
Hi Sergey,
This command is most probably replaced with the track number ip sla command, as the CLI has changed quite considerably regarding the RTR functionality (it is called IP SLA now). Try that out.
Best regards,
Peter
02-22-2012 04:39 AM
Hi Sergey,
This command is most probably replaced with the track number ip sla command, as the CLI has changed quite considerably regarding the RTR functionality (it is called IP SLA now). Try that out.
Best regards,
Peter
02-22-2012 05:34 AM
Hi Peter,
you are right. Thank you Cheers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide