07-26-2013 03:59 AM - edited 03-04-2019 08:34 PM
Please provide a detailed explanation of the below command used in Frame relay circuit.
interface Serial0/1/0
mtu 2044
bandwidth 1984000
no ip address
no ip proxy-arp
encapsulation frame-relay IETF
no fair-queue
frame-relay lmi-type ansi
!
interface Serial0/1/0.21 point-to-point
bandwidth 128000
ip address 10.2.255.13 255.255.255.252
traffic-shape rate 256000 128000 128000 1000
traffic-shape adaptive 128000
07-26-2013 06:04 AM
Hello
This is Generic Traffic shaping - GTS
AsI understand it, what you have posted is telling Serial0/1/0.21 to:
Rate all traffic at 256Kps and in case of congestion dont fall below 128kps ( adaptive)
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.
07-26-2013 07:48 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
You've looked up the command in the command reference and configuration guide? If so, what additional explanation are you seeking? I.e. what don't you understand?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide