03-08-2018 05:26 PM - edited 03-05-2019 10:03 AM
Hi, I'm trying to shape traffic on my network for a QoS project. I need to set an average and peak shape.
The issue I'm running into is that I can only set the average shape? I am shaping from within a class in a policy map.
This is from Packet Tracer but the problem also persists on the 2911 routers at my university. any help would be great !
Matt
Solved! Go to Solution.
03-09-2018 10:33 AM
Hello,
I tested out some releases, 15.2(4)S supports the 'shape peak' command, it looks like you need an S or T release.
Don't worry about what is available or not in Packet Tracer, as it uses just a very limited subset of the commands of a 'real' IOS.
03-09-2018 04:25 AM
Hello,
'shape peak' is not supported on all platforms. Can you post the output of 'show version' of one of your 2911 routers ?
03-09-2018 06:38 AM
R1#show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thurs 5-Jan-12 15:41 by pt_team
ROM: System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
cisco2911 uptime is 1 minutes, 37 seconds
System returned to ROM by power-on
System image file is "flash0:c2900-universalk9-mz.SPA.151-1.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO2911/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FTX152400KS
3 Gigabit Ethernet interfaces
2 Low-speed serial(sync/async) network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249856K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2911/K9 FTX15245305
Technology Package License Information for Module:'c2900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security disable None None
uc disable None None
data disable None None
Configuration register is 0x2102
03-09-2018 10:33 AM
Hello,
I tested out some releases, 15.2(4)S supports the 'shape peak' command, it looks like you need an S or T release.
Don't worry about what is available or not in Packet Tracer, as it uses just a very limited subset of the commands of a 'real' IOS.
03-16-2018 07:36 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide