Cisco 806 router cannot read Flash memeory and boots directly to RomMon. It acts as though there is no Flash installed.
Does this router come with 8MB Flash built in?
I see I can purchase additional 4MB or 8MB cards for it, but thought there was some permanently installed.
Any suggestions for how to get this up and running would be appreciated.
C800/SOHO series (Board ID: 17-100) platform with 32768 Kbytes of main memory
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...abortingÿ
System Bootstrap, Version 12.2(4r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
C800/SOHO series (Board ID: 17-100) platform with 32768 Kbytes of main memory
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
rommon 1 > meminfo
Main memory size: 32 MB.
Available main memory starts at 0x1b000, size 32660KB
IO (packet) memory size: 25 percent of main memory.
NVRAM size: 128KB
rommon 2 > dir flash: flash
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
dir: cannot open device "flash:"
rommon 6 > dev
Devices in device table:
id name
flash: flash
Thanks,
Jesse
