I am trying to leak route from default VRF so that access to internet can be provided in VRFs. I used static route method but this also caused vrfs to communicate with each other which is not desirable. Is there any way to do this? This is on Cisco nexus 9k.
ip route 0.0.0.0/0 Ethernet1/33/1 192.168.5.2 ip route 188.8.131.52/32 Ethernet1/33/1 192.168.5.2
ip route 192.168.1.0/24 Vlan1 vrf VPC-STARTUP ip route 192.168.2.0/24 Vlan2 vrf VPC-2
vrf context VPC-2 ip route 0.0.0.0/0 Ethernet1/33/1 192.168.5.2 vrf default
vrf context VPC-STARTUP ip route 0.0.0.0/0 Ethernet1/33/1 192.168.5.2 vrf default
I am trying to find a MIB which can get back the values of BFD session state such that it can be monitored by monitoring platform. On the Cisco ISO MIB Locator, it shows that a MIB is available and is supported on the version of software that we got on ou...
Currently when changing the Authentication Template under the Onboarding section, there is no choice but to remove SGTs, VNs and IP Pools which clearly disrupt existing services.
Hitless Authentication was introduced in Cisco DNA Center 1.3...
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 184.108.40.206 as the RP for these groups:220.127.116.11/3218.104.22.168/3222.214.171.124/24126.96.36.199/16 R2 - "advertising" its loopback0 int...