cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
336
Views
0
Helpful
1
Replies

VRF Router to non VRF serial interface

Stefan Marcin
Level 1
Level 1

Hello, I have trouble even raise communication between two routers - one is running vrfs and second is not. I have serial cable between them and they dont see each other.

Firstly - this router runs VRFs - one towards ,,internet" second towards ,,local" with INTERNET VRF i want to connect it to non vrf router 

Line protocol is down - running PPP on both routers 

R7#sh ip vrf int
Interface IP-Address VRF Protocol
Se1/0 10.0.1.2 internet down
Fa0/0 192.168.1.1 local up

R7#sh ip vrf internet
Name Default RD Interfaces
internet 30:321 Se1/0

ip vrf internet
rd 30:321
route-target export 30:321
route-target import 30:321
route-target import 30:123
!

1 Reply 1

Stefan Marcin
Level 1
Level 1

Okay, nevermind, problem solved, I forgot I had chap set on one router and on the other there wasnt, now it works :)

Review Cisco Networking for a $25 gift card