cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2095
Views
0
Helpful
1
Replies

Cisco SDWAN - Route Redistribution OMP to OSPF

Engineer101
Level 1
Level 1

Dear Experts,

While doing redistribution from OMP to OSPF, cant we set the type E1 and associated values?

1 Reply 1

Hi,

create localized route-policy (via policies >localized policy> route-policy) with action "metric" and/or "metric-type" and attach to OMP to OSPF redistribution (in OSPF template).

KananHuseynli_0-1692695071554.png

See respective actions from policy config guide:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-book-xe/localized-policy.html#id_117140

See "Redistribute Routes into OSPF" section from unicast overlay routing config guide:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/routing/ios-xe-17/routing-book-xe/m-unicast-routing.html#concept_jhq_r4p_13b

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.