HI if show vlan on nexus
Vlan244 is up, line protocol is up, autostate enabled
Hardware is EtherSVI, address is 003a.7d96.6f55
Description: RaMIN
Internet Address is 172.18.14.1/30
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 255/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
ARP type: ARPA
Last clearing of "show interface" counters never
L3 in Switched:
ucast: 0 pkts, 0 bytes
L3 out Switched:
ucast: 0 pkts, 0 bytes
Donnot Show usage ON VLAN
Now How can Enbale Counters On L3 VLANS that get Graphs by zabbix OR prtg OR cacti
