05-03-2021 01:12 PM - edited 05-03-2021 01:46 PM
I am hoping to validate how an ISR would be connected since this is my first SD-WAN Depoyment.
Going to use an ISR4331 for the Branch.
ISR G0/0/1 connects to MPLS (BGP)
ISR G0/0/0 connects to the core on VLAN 19 (EIGRP)
ISR G0/0/2 connects to the FW on VLAN 191 (EIGRP)
Solved! Go to Solution.
05-03-2021 04:33 PM - edited 05-03-2021 04:34 PM
Hi Todd,
Your connection of MPLS to gi0/0/1 looks fine. I am not sure about your LAN design and connections but looks fine on high level.
How about on-boarding this ISR to V-MANAGE, whats your plan. There are three methods to do that, you can find procedure for these three steps listed in this document:
05-03-2021 04:33 PM - edited 05-03-2021 04:34 PM
Hi Todd,
Your connection of MPLS to gi0/0/1 looks fine. I am not sure about your LAN design and connections but looks fine on high level.
How about on-boarding this ISR to V-MANAGE, whats your plan. There are three methods to do that, you can find procedure for these three steps listed in this document:
05-03-2021 05:16 PM
They have a spare 4331 that I can implement before moving over the MPLS connection. So I can do this as kind of a greenfield and not have to migrate the current ISR all in one shot.
05-03-2021 06:03 PM
Yes then it makes sense. Good luck with that!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide