Push the UTD virtual image from vManage to the device

[niwaki]

Hi everyone,
Need your help with the installation of the UTD image in the device.
I already have uploaded the Virtual Image in vmanage and verified that it has been in Maintenance, Software Repository.

I have checked how to install using bootflash.
but, the image is in vmanage.

So I need to know how to push the virtual image to the device.
Could you please tell me the CLI command to push the image to the device?

Also, I would be grateful if you could tell me where such a method is described.

Best regards,

[Flavio Miranda · Accepted solution]

Make sure you follow all the steps.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjl3uGB7ov3AhXSs5UCHWwiD1AQFnoECAUQAQ&url=https%3A%2F%2Fwww.cisco.com%2Fc%2Fen%2Fus%2Ftd%2Fdocs%2Frouters%2Fsdwan%2Fconfiguration%2Fsecurity%2Fios-xe-17%2Fsecurit... 

[niwaki]

Thank you for sharing the reference.
It is very helpful.

I have not given you the details.
Regarding the Virtual Image currently uploaded to vmanage, I did not upload it to vmangae myself.

Another person who left our team has uploaded UTD to vmangage and it was installed on that device in the past.
However, there is currently no UTD installed on the device. (Not sure why, someone on the team may have removed the UTD.)

Am I correct that the following steps are required to install the UTD on the device again, according to the shared reference?

1) Create a Feature Template and a Device template
2) Attach the Device to the Device Template
3) Identify the Recommended Security Virtual Image Version
4) Upload the Cisco Security Virtual Image to Cisco vManage （Already done）

Or should I delete the image and start from the beginning?
I would appreciate it if you could correct me if I am wrong.

Best regards,

[Flavio Miranda · Accepted solution]

Seems to me that you are correct and unless the uploaded image is not uptodate, I´d move forward with the same and avoid re-work

[niwaki]

Thank you so much