Solved: Re: Sd-WAN max Wan Interfaces

Hiram Morlan · ‎10-11-2020

Hi Guys,

I have a project about Sd-WAN, some branches have 2 internet connections and 1 mpls. Will this 3 Wan connection scenario is possible to deploy? What are the maximum Wan connections for Cisco Sd-WAN?

Thanks in advance.

Sengarth · ‎10-11-2020

Hi,

Your posted scenario is definitely supported. Up to 8 TLOCs are supported in Cisco SD-WAN. There is no fixed "WAN" interface that you need to plug in the cable on the vEdge or cEdge, any physical port on the device can be configured as a WAN interface. WAN can also be configured on a sub-interface (VLAN-tagged).

Refer to further explanation here.

View solution in original post

Sengarth · ‎10-11-2020

Hi,

Your posted scenario is definitely supported. Up to 8 TLOCs are supported in Cisco SD-WAN. There is no fixed "WAN" interface that you need to plug in the cable on the vEdge or cEdge, any physical port on the device can be configured as a WAN interface. WAN can also be configured on a sub-interface (VLAN-tagged).

Refer to further explanation here.