Viptela SD-WAN Centralized Policies

[Sebastian Haislmaier]

I'm in need of assistances please. Our Viptela SDWAN design is a Hub and Spoke which have two VRF's. VPN200 interface has a vrf of 200 for Mgmt. and VPN100 has a vrf 100 for Customer internal network. I need to create a policy that simulates the default route (0.0.0.0/0) disappearing in the vrf 100 customer network. I am doing this to see if our SolarWinds monitoring platform will trigger an alert when the default route (0.0.0.0/0) disappears. I have researched countless documentation on cisco site but have found no real answer, I hope someone can give me guidance on how to achive this please.

-Sebastian Haislmaier

[Kanan Huseynli]

Hi,

how is device configured for default route? Or it receives via OMP dynamically?

[Sebastian Haislmaier]

Default route received via omp dynamically in the vrf100 

[Kanan Huseynli]

Then, create centralized policy for that specific site in OUT direction which filters 0.0.0.0/0 route (match: 0.0.0.0/0 and action: reject).

[Kanan Huseynli]

@Sebastian Haislmaier  did you check this option? If you have problem with creating this policy section, I can help.

Just inform, you are testing in production or in lab and you have the same control policy for all sites or separate for each.

[MHM Cisco World]

You have vedge or cedge?

MHM

[Sebastian Haislmaier]

Hubs are C8500-12X
Spokes are C1121X-8P

[MHM Cisco World]

What @Kanan Huseynli suggestion is totally correct.

Did you test it?

MHM