09-28-2021 08:59 PM
Hi
I have an issue with stealthwatch v7.3. My smc no show the name of the interfaces for exporters. It usually display ifindex-24567xx ---
My config is
match datalink mac source address input
match datalink mac destination address input
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
collect interface input
collect transport tcp flags
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
I use sampler for the switch.
The community for snmp is v3. I have snmp ifindex persist and polling time is 1min.
Do you have any suggest?
Regards, Ivan.
06-05-2022 12:01 PM
Heyo!
I am facing the same issue, could you ever resolve it?
Thanks and br,
Jules
06-14-2022 05:59 AM
I had the same issue, TAC said it is a bug and to upgrade to the latest version of 7.3 or 7.4. We upgraded to 7.4 but some of the interfaces from exporters are not being displayed in the SMC.
06-14-2022 06:17 AM - edited 09-15-2022 09:35 AM
duplicate.
08-02-2022 10:27 AM
We are using 7.4.1 and we are also seeing some interfaces show as ifindex , so not sure what was fixed , but is random.
09-14-2022 03:05 AM
cisco dcloud 7.4.1 demo also showing all interfaces show as ifindex,What is the relationship between the number of ifindex and the interface on the exporter?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: