SNMP OIDs

[lydiahricova]

Dear Cisco Support, 

I want to setup the following monitoring : for Modem and SIM card for the following commands : 

• Sh cell 0/1/0 security (SIM Status = xxx)
• Sh cell 0/2/0 security (SIM Status = xxx)
• Sh cell 0/1/0 hardware (Modem Status = xxx)
• Sh cell 0/2/0 hardware (Modem Status = xxx)

Is it possible ? If yes, please let me know. 

Thank you 

Regards

[balaji.bandi · Accepted solution]

maybe try below OID ( parent one see if you get any information usefull ?)

Get signal Strength

.1.3.6.1.4.1.9.9.661.1.3.4.1.1.1.18

Get phone #

.1.3.6.1.4.1.9.9.661.1.3.1.1.4.18

Get SIM

.1.3.6.1.4.1.9.9.661.1.3.1.1.3.18

Get IMEI

.1.3.6.1.4.1.9.9.661.1.3.1.1.2.18

Roaming status

.1.3.6.1.4.1.9.9.661.1.1.1.6.18