FirePOWER Threat Defense for Integrated Services Routers ( ISR ) (Live Webcast July 8, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
Ask questions from July 8, 2015 through July 17, 2015
In October 2013 Cisco acquired Source Fire, an industry leader in the security solution space. Since the acquisition, Cisco has integrated Source Fire in the ASA platforms as well as in the ISR platforms.
In this session you will learn about Source Fire company history, the rebranding of Source Fire as FirePOWER Services and how to use FirePOWER effectively on the ISR G2 and 4K platforms on the UCS-E blade to secure the network from attacks and malware.
Kureli Sankar started with Cisco in Aug, 2006 as a TAC engineer in the firewall team in Research Triangle Park, North Carolina. As a TAC engineer she supported Cisco's security products. Since, May 6th 2013, she has taken up a new role as Technical Marketing Engineer, Enterprise Infrastructure and Solutions Group responsible for security features on Cisco's IOS and XE products.
She has presented at Cisco Live 2013 and 2014. She has also done quite a few Live Web Casts and ATE (Ask The Expert) events for our forum.
Prior to joining Cisco, Sankar worked for John Morrell Co., Cincinnati, Ohio where she was the network administrator in charge of the company's enterprise network covering 27 locations in the United States. She also was an adjunct professor at the University of Cincinnati, teaching undergraduate level networking courses. Sankar holds an engineering degree in Electrical and Electronics Engineering from Regional Engineering College, Trichirappalli, India, CCSP and CCIE Security #35505 certifications.While working full time, she volunteers at various organizations like Citizen School, Durham Performance Learning Center, NC First Robotics, Girl Scouts - Carolina, Raleigh Rescue Mission and gives back to the community
Hi Everyone, I have scoured the web and have nearly mirrored the setup as outlined here:https://community.cisco.com/t5/firepower/firepower-publish-internal-webserver/td-p/3672845 While following the guidelines for CISCO NAT rules. NAT works...
Can we support a customer adding in a PCI 1Gb or 10Gb Fiber NIC in the SNS-3600 series chassis? Is this supported under ISE 2.6?
Can they add to the empty PCI Riser slot or do they need to replace the existing 4-port Copper PCI NIC?
Customer (Govt ...
Currently working on updating our ironport to use LDAPS on port 3269. Currently it's just using regular LDAP on port 389. We have 2 LDAPS servers and the first succeeds when using the Start Test button but getting an error for the 2nd server. Any advice? ...