Hi all, we find that the standy ASA has ARP tbl rerr in the Stateful Failover Logical Update Statistics.There is no interface error on the stateful interface. All interfaces have identical speed and duplex (100Mb full). May i ask what is the problem?
Many thanks and Regards
Lau
Failover On
Failover unit Secondary
Failover LAN Interface: heartbeat Ethernet0/2 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 2 of 250 maximum
Version: Ours 7.2(2), Mate 7.2(2)
Last Failover at: 03:21:33 HKT Oct 7 2008
This host: Secondary - Standby Ready
Active time: 0 (sec)
slot 0: ASA5510 hw/sw rev (1.1/7.2(2)) status (Up Sys)
Interface Users_Segment (192.168.103.243): Normal
Interface Servers_Segment1 (10.152.1.243): Normal
Interface Servers_Segment2 (0.0.0.0): No Link (Not-Monitored)
Interface Users_Segment2 (0.0.0.0): No Link (Not-Monitored)
slot 1: empty
Other host: Primary - Active
Active time: 134677052 (sec)
slot 0: ASA5510 hw/sw rev (1.1/7.2(2)) status (Up Sys)
Interface Users_Segment (192.168.103.242): Normal
Interface Servers_Segment1 (10.152.1.242): Normal
Interface Servers_Segment2 (10.153.1.242): Normal (Not-Monitored)
Interface Users_Segment2 (10.80.99.243): Normal (Not-Monitored)
slot 1: empty
Stateful Failover Logical Update Statistics
Link : heartbeat Ethernet0/2 (up)
Stateful Obj xmit xerr rcv rerr
General 17956735 0 81571984 27837377
sys cmd 17956735 0 17956735 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 0 0 44411673 0
UDP conn 0 0 3604269 0
ARP tbl 0 0 15599307 27837377
Xlate_Timeout 0 0 0 0
VPN IKE upd 0 0 0 0
VPN IPSEC upd 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 4 133793495
Xmit Q: 0 1 17956735
