Introduction
This document discuuss the minimum configuration required to access the Cisco ASA through ASDM.
Complete the below steps.
.
Prerequisites
Requirements
There are no specific requirements for this document.
Configure
This section describes the information you need to configure the features described in this document.
Configurations
Complete the below steps.
1. Configure the management interface
conf t
int e 0/2
ip address 192.168.100.2 255.255.255.0
nameif manage
security-level 80
exit
exit
2. Configure the username and privilege
username Test password Test@Cisco privilege 15
3. Configure the Cisco ASA to allow http connections
http server enable
http 192.168.100.0 255.255.255.0 manage
Now, launch the ASDM by typing "https://192.168.100.2" in the web browser of any PC which is in 192.168.100.0 network.
You should be able to access the ASA using the ASDM from that PC.